|
Acura 1.8L B18B1 Engine Parts from 1996 to 2001
Fits: Acura Integra 1996 - 2001, Including GS, LS and RS
It's best to always double check your engine code before ordering parts. It's located halfway up the block, right next to the transmission housing.
The following are common engine and related parts for 1996 through 2001 Acura 1.8L B18B1 engines including engine kits, gaskets, pistons, rings, bearings, timing belt, tensioner and oil pump.
| Part Type |
Notes |
Part Number |
| ENGINE KITS |
|
|
| Complete Engine Kit |
|
SECK1297 |
| Engine Kit |
|
SEK1297 |
| Re-ring Kit |
|
SRK1297 |
| GASKET SETS |
|
|
| Full Set |
|
FGS2013 |
| Valve Grind Set |
|
HGS213 |
| INDIVIDUAL GASKETS |
|
|
| Head Gasket |
Multi-Layer Steel |
HG212 |
| Valve Cover Gasket |
|
VC212G |
| Oil Pan Gasket |
|
PG212 |
| SEALS AND PLUGS |
|
|
| Valve Stem Seal |
|
VSS215 |
| Camshaft Seal |
27mm x 43mm x 9mm, 2 Req. |
CS211 |
| Timing Seal |
38mm x 50mm x 7.5mm |
TC217 |
| Rear Main Seal |
80mm x 100mm x 10mm |
RM205 |
| PISTONS AND RINGS |
|
|
| Piston Set w/Pin |
CL:.035mm/RG:1.0x1.2x2.8mm |
P212A |
| Hastings Rings |
1.0mm x 1.2mm x 2.8mm |
2C4666 |
| OIL AND WATER PUMPS |
|
|
| Oil Pump Assembly |
|
OP212A |
| Water Pump w/Gasket |
|
WP212A |
| ENGINE BEARINGS |
|
|
| Rod Bearings |
|
RB205 |
| Main Bearings |
|
MB212 |
| Thrust Washers |
|
TW212 |
| VALVETRAIN COMPONENTS |
|
|
| Intake Valve |
6.6mm x 31mm x 105.25mm |
IV212A |
| Exhaust Valve |
6.55mm x 27.95mm x 105.75mm |
EV212A |
| In. Valve Guides |
6.57mm x 12.1mm x 45.1mm |
VGI211 |
| Ex. Valve Guides |
6.6mm x 12.12mm x 50.1mm |
VGE211 |
| TIMING COMPONENTS |
|
|
| Timing Belt |
|
TB212 |
| Belt Tensioner |
|
TBT212 |
|
|
|
|
